2 Connecting Up
Wall-mounting your systemConnecting the AM and FM
If you prefer, you can hang the satellite speakers and/or the
antennas
CD-tuner (together with the optional tape deck, MD recorder
Connecting the supplied antennas will allow you to listen to
and CD-Recorder) on a wall. (Screws and other fixings are not
both AM and FM radio broadcasts. If you find that reception
supplied.)
quality is poor, an outdoor antenna should give you better
Make sure of the following when wall-mounting any
sound qualityNsee Connecting external antennas on the
equipment:
following page for more on how to do this.
Y The wall is strong enough to support the weight.
Y Before making or changing antenna connections, make
Y The screws are suitable for the wall material (concrete,sure that the power is switched off and the unit
wood, etc.), and are long enough to support the weight.
disconnected from the AC wall outlet.
Y YouOll still be able to easily operate the system using the
Slide off the top cover to access the antenna
remote control or the top panel controls.
terminals and the auxiliary inputs. (AUX IN)
Y You fix all the required screws (2 for each speaker; 4 for
Press down on the center of the topcover while sliding off.
the CD tuner and other components). Using fewer than
this may make the system unstable, causing an accident.
After finding a suitable location, stick the supplied paper
pattern on the wall. This makes putting the screws in the
correct place very easy.
If youOre wall-mounting the CD-tuner (or other optional
components), attach only Stand A. If wall-mount the satellite
speakers, do not attach the speaker stands.
The diagram below shows the dimensions for the screws youOllTop cover
need.
(Illustration shows UK model)
3.5mm
10mmAM loop antenna
1 Assemble the antenna as shown.
After fixing the screws, hang the speakers and/or other
components on the wall.
Important
Pioneer bears no responsibility for accidents
resulting from faulty assembly or installation,
insufficient mounting strength of walls or
other building fixtures, misuse or natural2 Twist the exposed wire stands together.
disasters.
3 Press the tabs to open the terminals then
insert a wire fully into each. Release the tab to
secure the wire.
9 |
ACEC
