AKM 439PRODUCT DESCRIPTION SHEET
FR
1.Removable panstand grids
2.Large burner
3.Rapid electric hotplate
4-5. Medium burners
6.Large burner control knob
7.Medium burner control knob
8.Medium burner control knob
9.Electric hotplate control knob
10. Pilot lamp for electric hotplate
Symbols
Shaded
Tap closed
circle
Large
Maximum opening/delivery
flame and
and electronic ignition
star
Minimum opening or
Small flame
reduced delivery
Operation of burners with electric Operation of the electric hotplate
ignitionSet the knob to one of positions 1-6, which
To light one of the burners:correspond to different temperatures.
?Press the relative knob and turn itTo switch off the hotplate, set the knob to
anti-clockwise to the large flame and star position ?0?.
setting.
Important
At the same time, keep the knob pressed against Improper use of the grids can result in damage to
the control panel until the burner ignites.the hob: do not position the grids upside down or
Once the burner is lit, keep the knob pressed slide them across the hob.
for about 10 seconds.
Do not use:
Release the knob.
?cast iron griddles or terracotta pots and pans
If the burner does not ignite, repeat the operations ?heat diffusers such as metal mesh, or any
described above.other types
Note:?two burners simultaneously for one
?Should particular local conditions of the receptacle (e.g. fish kettle).
delivered gas make the ignition of the burner
difficult, it is advisable to repeat the
operation with the knob turned to the small
flame setting.
?The safety device of the burner shuts off the
gas supply to the burner if its flame goes out
accidentally (because of a sudden gust of
wind, an interruption in the gas delivery, the
overflowing of liquids, etc.).
5019 319 61881 |
ACEC
