WATER HEATING HOLD SIGNAL LIGHT &AN SIGNAL LIGHT DELAY WdSH SIGNAL LIGHT
CHINA CRYSTAL Cycle
A light wash and gentle dry for
china and crystal. Unless AIR DRY is
selected, the heating element
cycles on and off during the ?dry?
part of the cycle. Cycle time is
about 35 minutes.
RINSE & HOLD Cycle
For rinsing a few items to be washed
one or more days later. Cycle time is
about 10 minutes.
Use AIR DRY only. Do not use HI-TEMP WASHING Option.
save energy, but dishes take longer to dry (Over-
The AIR DRY Option
night) and some water spotting may result.
Air in the dishwasher is automatically heated Some items [such as plastics) may need towel
during the ?dry? part of all cycles. drying.
If the AIR DRY Optton is selected, air in the For best results, use a liquid rinse aid such as
dishwasher is not heated. Usina this option heIDS Jet-DrV
HI-TEMP WASHING Option If the water is already hot enough, the cycle
continues without delay. The WATER HEATING
When this option is selected, water for the
HOLD Signal Light will be on while the cycle de-
main wash and the final rinse is heated tol45?F
lays for water heating.
(63°C).
4. Close and latch the door. The DELAY WASH
Using DEW START
Signal Light will come on until the selected
1. Push desired Cycle Selector Button. cycle starts.
2. Push desired Option Selector Buttons. NOTES :
3. Turn Control Knob clockwise to the number of l You can add items while time is counting
hours [from 1 to 6 hours] you want the dish- down. Close and latch the door. The timer will
washer to delay before the selected cycle not advance if the door is unlatched.
starts.
l RINSE & HOLD, LOW ENERGY WASH and CHINA
CRYSTAL Cycles can?t be delayed.
2. Turn the Cycle Control Knob clockwise to the
Changing a setting
cycle you want.
You can change a setting anytime during 3. Be sure the detergent dispensers are filled
any cycle.
properly for the new cycle.
1. Press in the door latch to unlatch the door 4. Close and latch the door. The dishwasher will
and stop the cycle.
automatically start the new cycle.
The CLEAN Signal Light To turn light off, turn the Control Knob clock-
wise slightly until the light goes off.
The CLEAN Signal Light will come on when a
washing cycle is complete.
9 |
ACEC
