125994852.qxp 2005-03-16 08:24 Page 9
Use
The control panel
ENGLISH
1 Programme chart6 Start button
This will help you to select the correct programme forPress this button for about 2 seconds to start the
drying.dryer after having selected the programme.
If the door is opened while the programme is
2 Mains-ON lightrunning, this button must be pressed again after
closing the door in order to restart the programme
Comes on when the appliance is switched onfrom the point at which it was interrupted.
(ON/OFF button pressed down) and goes out whenThis button must also be pressed after a power cut.
this button is released.In both cases light or (depending on the
phase in progress)
flashes to remind you that the start button needs to
3 ON/OFF button be pressed again.
This button is used to switch the dryer on. At the end
of the programme, release this button by pressing it7 Programme phase indicator lights
again to switch the dryer off.
These lights indicate the various phases of the
programme as they are being performed.
4 Low temperature button
?Drying? light
Pressing this button allows drying to be performed at
a lower temperature, for delicate items. This light indicates that the appliance is in the drying
The corresponding pilot light comes on.phase.
?Cooling? light
5 Buzzer OFF button This light indicates that the appliance is in the
cooling phase. At the end of drying, there is a 10
A buzzer sounds during the anti-creasing phase.minute cooling phase to cool the laundry.
Press this button when selecting the programme if
you wish to switch the buzzer off. The correspondingIf light or is flashing, this means that the Start
light illuminates.button needs to be pressed again for the programme
to resume.
?End of programme? light
This light flashes at the end of the cooling phase and
during the anti-creasing phase.
9 |