Using the Rotisserie & Side Burners
ROTISSERIE LIGHTING
Open the lid. Push and turn the control knob counter clock-
wise to the OHIGH� position. Wait 5 seconds. Then press
and hold the electronic ignitor button.YouOll hear a snapping
sound. If the burner does not light in 4 seconds, turn the
control knob to OFF and wait 5 minutes before trying again.
Once lit, turn the control knob to the desired setting.
(See Fig. 16)
(If the ignitor does not function, the burner can be lit by hold-
ing a lit match to the burner while the control knob is turned
counter clockwise to OHIGH�.) (See Fig. 17)
NOTE: After the first use the stainless steel around the
burner will darken. This is a normal occurrence ofFig. 16
the non-rusting, stainless steel used on the grill.
The infrared panel will also darken after initial use.
This is a normal occurrence.
Note: Do Not operate the main burners
and infrared back burner at the same
time.
SIDE BURNER LIGHTING
Push and turn the control knob to the OHIGH�position and
immediately press and hold the electronic ignitor button.Fig. 17
YouOll hear a snapping sound. It may be necessary to hold
the electronic starter button for about 4 seconds. If the
burner does not light in 4 seconds, turn the knob to the
OOFF� position and wait 5 minutes before trying again.
Repeat above steps to light remaining burners. (See Fig.
18)
MATCH LIGHTING
If by chance the electronic ignitor does not light the
burner, the burner may be lit with a match. Keep your
face as far away from the burner as possible and place aFig. 18
lit, long stem match through the spaces in the grate to the
ports of the burner. Position the match near the burner
ports and push and turn the control knob to the
OHIGH�position.
14 |
ACEC
ELECTROLUX
