Electrical connections
Any electrical work required to install thisPermanent Connection
appliance should be carried out by aIn the case of a permanent connection, it is necessary
qualified electrician or competent person, inthat you install a double pole switch between the
accordance with the current regulations.appliance and the electricity supply (mains), with a
minimum gap of 3 mm. between the switch contacts
and of a type suitable for the required load in
THIS APPLIANCE MUST BEcompliance with the current electric regulations.
EARTHED.
The switch must not break the yellow and green earth
cable at any point.
The manufacturer declines any liability
should these safety measures not be
Ensure that the hob supply cord does not
observed.
come into contact with surfaces with
temperatures higher than 50 deg. C.
This appliance is designed to be connected
to a 230-240V 50Hz AC electrical supply.
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance
rating plate. The rating plate is located on the bottom
of the hob. A copy is attached on the back cover of
this book.
The appliance is supplied with a 3 core flexible
supply cord incorporating a 3amp plug fitted. In the
event of having to change the fuse, a 3amp ASTA
approved (BS 1362) fuse must be used.
Should the plug need to be replaced for any reason,
the wires in the mains lead are coloured in
accordance with the following code:
Green and Yellow - Earth
Blue- Neutral
Brown- Live
N Connect the green and yellow (earth) wire to
+the terminal in the plug which is marked with
the letter 'E' or the earth symbol or
coloured green and yellow.
N Connect the blue (neutral) wire to the terminal
in the plug which is marked with the letter 'N'
or coloured black.
N Connect the brown (live) wire to the terminal
in the plug which is marked with the letter 'L'
or coloured red.
Upon completion there must be no cut, or stray
strands of wire present and the cord clamp must be
secure over the outer sheath.
FO 0390
A cut off plug inserted into a 13 amp
socket is a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of
safely.
16 |
ACEC
ELECTROLUX
