InsInstrtructions fuctions for the Insor the Insttalleraller
Technical Specifications
ModelER 6642 T
Gross capacity (l)Frozen food comp.: 20
Fresh food com.: 137
Net capacity (l)Frozen food comp.: 20
Fresh food com.: 118
Width (mm)550
Height (mm)850
Depth (mm)600
Energy consumption (kWh/day)0.63
(kWh/year)230
Energy class, according to EU StandardsB
Star rating of frozen food compartment**
Rated power (W)100
Weight (kg)35
Installing the applianceLocation
Transportation, unpackingThe appliance should be positioned in a well
ventilated, dry room.
The appliance and the interior fitting are protected for
transport.Energy use is affected by the ambient temperature.
Remove all packaging and any adhesive tape.The appliance should therefore:
Any remnants of adhesive can be removed usingnot be installed next to radiators, cookers or
white spirit.other sources of heat
After transportation the appliance must not beonly be installed at a location where the ambient
switched on for 2 hours. This is to allow thetemperature corresponds to the climate
refrigerant to settle.classification, for which the appliance is
designed.
CleaningThe climate classification can be found on the
Clean the accessories and the inside of the applianceserial plate.
with warm water and bicarbonate of soda (5 ml to The following table shows which ambient
0.5 litres of water). Rinse and try thoroughly.temperature is correct for each climate
Do not use detergents, abrasive powders, highlyclassification:
perfumed cleaning products, wax polishes or
cleaning products containing bleach or alcohol.
Climate Classification Ambient Temperature
SN+10 to +32 C
N+16 to +32 C
ST+18 to +38 C
12 |
ACEC
ELECTROLUX
