The control panel and programme table
- All figures are nominal and vary for example due to temperature variations on the inlet water.
- The figures apply to washing up 5 settings.
12 3654
1 65! Intensive6 Salt indicator lamp
For loads which have heavily dried-on food The operating lamp indicates when the salt needs to be
remnants and for those which are heavily soiled.replenished. The lamp may remain lit for one or more
programmes after replenishment, which is fully normal.
2 55! Normal
For normal soiled loads.Door lock
Press the handle down and open the door. Avoid opening
3 45! Quickthe door while the machine is running.
For lightly soiled loads, such as cups, saucers If the door is openedand is put standing ajar after a
and glasses.completed programme, the dishes will dry faster.
If more than one Temperature button is pressed in,
the machine selects the lowest temperature.
Wash phase
4 Selector knob
To start the machine; turn the selector knob clockwise
to the programme start. The ON/OFF switch is built
into the programme selector. To isolate the dishwasher
from the mains completely, unplug it from the wall Rinse phases
socket.
During the water heating process, the timer is
standing still.
Rinse with heated water
5 Cycle sequence lamp
While the programme is in progress, the operating
lamp is lit and it goes out when the programme
is ready.
- 15 - |
ACEC
ELECTROLUX
