Before use
Before using your dishwasher for theFilling with salt
first time:Only use salt specifically designed for use in
dishwashers.
1.Ensure that the electrical and water connections comply
All other types of salt not specifically designed for use in
with the installation instructions
a dishwasher, especially table salt, will damage the water
2.Remove all packaging from inside the appliance
softener.
3.Set the water softenerOnly fill with salt just before starting one of the washing
4.Pour 1 litre of water inside the salt container and then fill programmes.
with saltThis will prevent any grains of salt or salty water, which
may have been spilled, remaining on the bottom of the
5.Fill the rinse aid dispenser
machine for any period of time, which may cause
6.Run a Rinse and Hold programme.
corrosion.
To fill:
Setting the water softener
1.To fill with salt, unscrew the cap of the salt container.
The dishwasher is equipped with a water softener designed to
2.Pour 1 litre of water inside the container (this is necessary
remove minerals and salts from the water supply, which would
only before filling with salt for the first time).
have a detrimental or adverse effect on the operation of the
appliance.3.Using the funnel provided,
The higher the content of these salts, the harder your water is.pour in the salt until the SALE
SALT
Water hardness is measured in PPM (parts per Million).container is full.SALZ
Do not worry if water over SEL
The softener should be adjusted according to the hardness of
flows from the unit when
the water in your area. Your local Water Authority can advise
filling with salt, this is quite
you on the hardness of the water in your area.
normal.
The dishwasher is factory set at level 2.
If this level is not suitable for your area the softener should be4.Replace the cap making
adjusted. sure that there is no trace
SR06
of salt on the screw thread
Water hardnessor on the gasket.
LevelPPMUse of5.Screw on the cap tightly.
(Parts per Million)salt
00 - 80NO
The salt container will require topping up periodically.
81 - 200YES1
The salt cap has a refill indicator window in the centre. A
2201 - 400YESgreen floatis clearly visible when there is salt inside the
container, and almost disappears when the salt has finished
3401 - 600YES
reminding you to add salt.
4601 - 800YES
5801 - 900YES
If your water is level 0 it is already soft and therefore there
is no need to use salt.
In this case adjust the water softener on level 1 without
using salt.
SR11
To adjust the water softener
With a screwdriver turn the selector on the upper front corner
of the machine until the level required corresponds with the
marker.
34
25
21
AA05
5 |
ACEC
ELECTROLUX
