The plug moulded onto the lead incorporates a fuse.
For replacement, use a 13amp BSI362 fuse. Only
Electrical connections
CONTENTS
ASTA or BSI approved fuses should be used.
Any electrical work required to install this appliance
The plug must not be used if the fuse cover/carrier is
should be carried out by a qualified electrician or
lost. The cover/carrier is indicated by the coloured
competent person.insert at the base of the plug.
WARNING:THIS APPLIANCE MUST BEInstructions for the UserInstructions for the
A replacement cover/carrier must be obtained from
EARTHED.your local Electrolux Service Force Centre.
Installer
Important Safety Information2
The manufacturer declines any liability shouldThis appliance complies with the E.E.C. Directive
No. 87/308 of 2.6.87 relative to radio interferencethis safety measure not be observed.
Operation 4Technical Specification12
suppression.
If the plug that is fitted to your appliance is not
Before using 413
suitable for your socket outlet, it must be cut off andInstallationThis appliance complies with the following
the appropriate plug fitted.E.E.C. Directives:Control panel4
Positioning13
Remove the fuse from the cut off plug.- 73/23 EEC of 19.2.73 (Low Voltage Directive)Temperature control4
Rear Spacers13
and subsequent modifications;
The cut off plug should then be disposed of toFreezing fresh food4
prevent the hazard of shocks in case it should beElectrical Connection14- 89/336 EEC of 3.5.89 (Electromagnetic
Frozen food storage5
plugged into a 13amp socket in another part of yourCompatibility Directive) and subsequent
Door Reversal15
home.modifications.Thawing5
Please ensure that when the appliance isMaking ice cubes5
Importantinstalled it is easily accessible for the engineer in
Normal operating sounds6
the event of a breakdown.
The wires in the mains lead are coloured in
Cold accumulators6
accordance with the following code:
Health and Safety Guidelines6
Green and Yellow - Earth
Blue - Neutral7
Maintenance and Cleaning
Brown - Live
Internal cleaning7
If you fit your own plug, the colours of the wires in
External cleaning7
the mains lead of your appliance may not correspond
with the markings identifying the terminals in yourWhen the appliance is not in use 7
plug, proceed as follows:
Defrosting7
Something Not Working9
-
Service and Spare Parts10
Customer Care Department10
Guarantee Conditions 11
-
Connect the Green and Yellow (earth) wire to the
terminal in the plug which is marked with the letter
?E? or the earth symbol or coloured green and
yellow.
Connect the blue (neutral) wire to the terminal in the
plug which is marked with the letter ?N? or coloured
black.
Connect the brown (live) wire to the terminal in the
plug which is marked with the letter ?L? or coloured
red.
143 |
ACEC
ELECTROLUX
