SOMETHING NOT WORKING?
Problems which you can resolve yourselfUnsatisfactory washing results
nToo little detergent or unsuitable detergent has
The machine does not start up:
been used.
Check that the door is firmly closed.n
nStubborn stains have not been treated prior to
nCheck that the machine is plugged in and thatwashing.
there is power at the socket.
nThe correct temperature was not selected.
nCheck that the main fuse has not blown.
The machine vibrates or is noisy:
nCheck that the programme selector knob is posi-
tioned correctly and that the start/stop button has
nCheck that all the transit bolts and packing have
been pressed.
been removed.
The machine does not fill:nCheck that the machine is not resting against any-
thing.
nCheck that the water tap is open.
nCheck that the support feet are resting firmly on
nCheck that water is coming out of the tap.
the ground.
nCheck that the inlet hose is not squashed or
nCheck that the laundry is evenly distributed in the
kinked.
drum.
Check that the filter in the inlet hose is not blocked.nENGLISH
nMaybe there is very little laundry in the drum.
nCheck that the door is closed.
The door will not open:
The machine fills then empties immedi-
natelyThe programme is still running.
nThe door lock has not yet been released. The door
The end of the drain hose is too low. Refer to rele-cannot be opened until the door lock light has gonen
vant paragraph in Owater drainage� section.
out.
The machine does not dry:
The machine does not empty and/or does
not spin:nCheck that the drying time has been selected.
nnCheck that the tap is open.Check that the drain hose is not squashed or
kinked.nCheck that the drain filter is not blocked.
nThe drain filter is blocked. Clean it.nCheck that the drum is not overloaded.
nA programme which stops with the water in the tubn Check that a suitable drying time has been select-
after the last rinse has been selected.
ed, in the correct sector.
There is water on the floor:If you are unable to identify or solve the problem, con-
tact our service centre. Before telephoning, make a
nToo much detergent or unsuitable detergent (crenote of the model, serial number and purchase date of-
ates too much foam) has been used.your machine: the Service Centre will require this
information.
nCheck whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this
as the water runs down the hose; check to see if itRating plate
is damp.
nCheck that the drain hose is not damaged.
nCheck that the drain filter has been refitted correct-
ly after cleaning.
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042
43 |
ACEC
ELECTROLUX
