132988520 GB.qxd 19/07/2004 09.12 Pagina 15
7. Select the desired options12. Cancelling a programme
The light corresponding to the depressed buttonTurn the selector dial to O to cancel a programme
illuminates.which is running. Now you can select a new
ENGLISH
programme.
13. How to open the door after the
programme has started
First set the machine to PAUSE by pressing the
START/PAUSE button.
If the door does not open, this means that the
machine is already heating, that the water level is
above the bottom edge of the door or that the drum
8. Select the DELAY START optionis turning.
To delay starting of a programme, press the DELAYIf you cannot open the door but you need to open it
START button, before starting the machine, until theyou have to switch the machine off turning the
light corresponding to the required delay illuminates.selector dial to O. After about 3 minutes the door
can be opened (pay attention to the water level and
temperature!). To restart the programme switch on
the machine and select again the desired
programme and options. Press START/PAUSE
button .
13. At the end of the programme
The washing machine stops automatically.
If the Rinse hold option has been selected, the
9. Start the programmedoor is locked, the light of the START/PAUSE button
Press the START/PAUSE button . The relevantgoes off, andremain lit, to indicate that the
light will stop flashing. and only the light relevant towater must be drained before opening the door.
the phase that is in progress will remain lit.
Turn the programme selector dial to Reset O to
If you have selected the DELAY START, the machine
switch the machine off.
starts its hourly countdown.
Remove the laundry from the drum and carefully
check that the drum is empty so as to avoid any
10. Altering a programmeforgotten items being damaged in a subsequent
wash (e.g. shrinking) or their colour running into a
You can alter the programme before it starts.
load of whites.
When the programme has started, you can only
If you do not intend to carry out another wash, close
reset it by turning the programme selector dial to O
the water tap.
and then you can select the new programme. Start it
Leave the door open to prevent the formation of
by depressing the START/PAUSE button .
mildew and unpleasant smells.
11. Interrupting a programme
Depress the START/PAUSE button to interrupt a
programme which is running, the corresponding
light starts to flash. Depress the same button again
to restart the programme.
15 |