1 July 1994Duplex/Exit Unit
2.10.9 Replacing the eject tray sensor
1.Turn off the main switch, and remove the tray
upper cover.
2.Remove the eject tray sensor (2 screws).
3.Replace the sensor, and reassemble in the
reverse order.
Eject tray sensor
2.10.10 Replacing the eject junction sensor
1.Turn off the main switch, and remove the tray
Copy tray
upper cover.Upper cover stay
bracket
2.Remove the upper cover stay (2 flat head screws).
3.Remove 4 screws from the copy tray bracket.
Then, turn the bracket to right.
Copy tray
4.Remove the grip bracket (3 flat head screws).
CAUTION
When installing the grip bracket, check the grip
operation. The copy tray must be opened by the
grip operation.
5.Remove the copy tray.
Grip bracket
6.Remove the eject junction sensor (2 screws).
7.Replace the sensor, and reassemble in the
reverse order.
Eject junction sensor
2-73 |
ACEC
