Cleaning
Warning: always disconnect the hood from the mains power supply
before cleaning it.
Never insert pointed objects in the motor?s protective grid.
Wash the outside surfaces using a delicate detergent solution.
Never use caustic detergents or abrasive brushes or powders.
Only ever clean the switch panel and filter grille using a damp cloth
and delicate detergents.
It is extremely important to clean the unit and change the filters at
the recommended intervals. Failure to do so will cause grease
deposits to build up that could constitute a fire hazard.
Mounting accessories included
1 deflector (3 pieces to assemble)
2 metal screws 3,5 x 13 (to assemble the deflector)
1 chimney support (3 pieces to assemble)
4 metal screws 4 x 8 (to assemble the chimney support)
4 metal screws 3,5 x 9,5 (to affix the deflector to the support)
1 reduction flange O 125-120 mm
1 support bracket
6 wood-screws 5 x 45 mm (for wall mounting)
6 wall plugs O 8 mm (for wall mounting)
2 metal screws 2,9 x 6,5 (for upper chimney mounting)
8 metal screws 3 x 10 (to affix the screen and lower chimney to the
cooker hood)
1 allen spanner (for TORX screws)
Electrical connection
Safety warnings for the electrician
Before connecting the appliance to the power supply, check that the
voltage indicated on the rating plate corresponds to the mains power
supply available. Appliances fitted with a plug can be connected to any
standard power socket within easy access.
Should it be necessary to provide a fixed connection, the hood must only
be installed by an electrician authorised by the local electricity board.
When installing, an omnipolar disconnector with a distance of at least
3mm between contacts must be provided.
The manufacture declines all responsibility for malfunctions resulting from
failure to comply with the above instructions.
Electrical connection
220-240 V - by means of fixed power cable with plug.
(Fixed connection of the appliance must only be carried out by an au-
thorised electrician.)
10 |
ACEC
