Built-In Instructions
for model EGL3001X
!WARNINGThe Electrolux Grill model EGL3001X can be installed as a
built-in grill. If installed as a built-in grill, the outdoor cooking
center must be constructed of non-combustible material.
PLANNING AND DESIGN
Start by identifying the number and size of components you want to include:
Grill, side burner, access doors for storage or other items you may wish to furnish
such as: refrigerator, sink, warming drawer. Countertops must be constructed
with non-combustible, outdoor-safe materials. Consider outdoor lighting to
illuminate after-dark Grilling. Review the drawings on the following pages to
determine the exact dimensions and items needed for a built-in Grill. Keep in
mind that the gas line hook-up is on the right hand side for the main Grill head.
The structure, Grill and support items must be kept level throughout the
installation to ensure proper operation.
LOCATION
Take into account convenience and visual impact as well as traffic flow, wind
exposure, and the site?s structural suitability. The Grill should never be placed in
an enclosed area without an approved ventilation system, or beneath a
combustible overhang. Because the Grill exhausts to the rear, it should never be
located in front of a window or less than 30 cm from hard-to-clean surfaces.
We recommend keeping your gas supply lines as short as possible for best
performance. To ensure a perfect fit, we strongly recommend that you have all
components on hand prior to final construction.
CLEARANCE TO NON-COMBUSTIBLE CONSTRUCTION
For your safety a minimum of 8 cm clearance from the back of the grill to non-
combustible construction is required. You should allow at least 15 cm side
clearance to non-combustible construction. The side vents on this unit can be
covered for built in installations without danger of fire or without impairing the
operation of the grill
10 |
ACEC
