INSTALLATION INSTRUCTIONS
It is dangerous to alter the specifications or attempt to modify this product in any way.
Technical Information
DIMENSIONSHEIGHT:15cm
WIDTH:60cm
DEPTH:48cm
DEPTH WITH VISOR OPEN:53cm
WEIGHTGROSS:8,5kg
NET:7,4kg
ELECTRICAL SUPPLY:Voltage (50Hz)220-240 V
POWER CONSUMPTION:190W
FAN MOTOR:110W
LAMP:2 x 40 W80W
SUITABLE FOR INSTALLATION
ABOVE:ELECTRIC HOB:7KW (max)
GAS HOB:10KW (max)
SLOT-IN GAS COOKER13.5KW (max)
SLOT-IN ELECTRIC COOKER12.4KW (max)
Note: CE Marking certifies that this appliance complies with the requirements
laid down in EEC directive 89:336. (Electromagnetic compatibility) and
subsequent modifications and Low Voltage directive 72/23/E.
ELECTRICAL CONNECTIONS
This appliance must be earthed
Electrical RequirementsThis appliance is fitted with a 2 core mains
Any permanent electrical installation mustcable and must be permanently connected to
comply with the latest I.E.E. Regulations andthe electricity supply via a double-pole switch
local Electricity Board regulations. For your ownhaving 3mm minimum contact gap on each
safety this should be undertaken by a qualifiedpole. A Switched Fuse Connection Unit to
electrician e.g. your local Electricity Board, or aBS1363 Part 4, fitted with a 3 Amp fuse, is a
contractor who is on the roll of the Nationalrecommendad mains supply connection
Inspection Council for Electrical Installationaccessory to ensure compliance with the Safety
Contracting (NICEIC).Requirements applicable to fixed wiring
instructions.
Electrical Connection
Before connecting to the mains supply ensureThis appliance conforms to BS 800: 1988 and
that the mains voltage corresponds to theEEC Directive No. 78 308 regarding
voltage on the rating plate inside the cookersuppression of radio and television
hood.interference.
10 |
ACEC
