The door shelves
To permit storage of food packages of various sizes
shelves can be adjusted in height.
To do this proceed as figure.
PR187
For more thorough cleaning, the bottle shelf can be
removed by pulling them in the direction of the arrows,
then refitting it in position.
PR190
DEFROSTING
While in operation the -star compartmentImportant
becomes progressively covered with frost.A temperature rise of the frozen food packs
This frost, which acts as an insulator and thusduring defrosting may shorten their storage
prevents the cold from reaching the food should belife.
removed whenever the thickness of the frostNever use sharp metal tools to scrape off frost
exceeds 1/4".from the evaporator as you could damage it
To carry out complete defrosting proceed as follows:beyond repair.
1.Push the conveyor completely in.
2.Place a tray on the upper shelf of the refrigerator
under the drain hole of the conveyor.
3.Remove any food from inside the -star
compartment, wrap it in several sheets of
newspaper and store in a cool dry place.
4.Turn the thermostat knob on position �OE. To
accelerate defrosting, place a bowl of hot water
inside the compartment (with a piece of
cardboard underneath the bowl as protection).
5.When defrosting is completed, dry thoroughly and
remove the water collected in the tray.
Turn the thermostat knob on a medium position to
restart the appliance.
After letting the appliance run for at least half an
hour, replace the previously removed food into the
-star compartment.
When defrosting it is not necessary to remove the
foods from the inner door and the refrigerator
compartment.
7 |
ACEC
