Shelf holdersFresh food refrigeration
Your appliance is equipped with shelf retainers thatTo obtain the best performance, do not store warm
make it possible to secure the shelves duringfood or evaporating liquids in the refrigerator; cover
transportation.or wrap the food, particularly if it has a strong flavour.
Do not cover the shelves with any protective
To remove them proceed as follows:
material, such as paper, cardboard or plastic, which
Raise the shelf from the back, push it in the direction
may obstruct the air circulation.
of the arrow until it is freed and remove the retainers.
To help you use your refrigerator correctly, here are
some more useful hints:
Raw meat (beef, pork, lamb & poultry): wrap in
polythene bags and place on the glass shelf above
Door reversal directionsthe salad drawers.
Meat can only be stored safely in this way for
1. Disconnect from the electricity supply.
one or two days at the most.
2. Remove all loose items, including food, store food
Fruit & vegetables: these should be thoroughly
in a cool place.
cleaned and placed in the salad drawers.
3. Gently lay the fridge/freezer on its back with the
Butter & cheese: these should be placed in special
top held away from the floor by 5-8 cm (2-3
airtight containers or wrapped in aluminium foil or
inches) of packing.
polythene bags to exclude as much air as possible.
4. Remove the feet (B).
Milk bottles: these should have a cap and should be
5. Remove bottom hinge (A).stored in the bottle rack on the door.
6. Remove the freezer door by releasing it from the
middle hinge (H).
7. Unscrew the middle hinge.
8. Slide out the fridge door from pin (G), unscrewWarning
pin (G) and then screw it down into the hinge hole
If using the appliance with the salad drawer
provided on the opposite side, after having
removed, please ensure the vent in the back wall of
removed the small plugs which should then be
the appliance is not obstructed.
fitted on the opposite side.
9. Remove the plastic blanking screws from the left
hand hinge position, refit to the right hand hinge
position.
10 Refit the fridge door and replace the middle hinge
to the left hand side.Positioning the door shelves
11.Replace the door and bottom hinge (A) on theThe door shelves can be easily removed for
opposite side.cleaning. Gently ease the shelf in the directions
12.Refit the feet (B).shown.
Attention
After completion of the door reversing operation,
check that the door gasket adheres to the cabinet. If
the ambient temperature is cold (i.e. in Winter), thePositioning the inner shelves
gasket may not fit perfectly to the cabinet. In that
case, wait for the natural fitting of the gasket orThe walls of the refrigerator have runners so that
accelerate this process by heating up the partshelves can be positioned as desired.
involved with a normal hairdryer on a low setting.For better use of space, the front half-shelves can lie
over the rear ones.
165 |
ACEC
