OPERATION
Before using
Remove all securing tapes. Wash inside the
appliance with lukewarm water and bicarbonate of
soda (5 ml to 0.5 litre of water).
Do not use soap or detergent as the smell may
linger. Dry thoroughly.
Control panel
A -Pilot light - Green
B -Thermostat control knob
C -Fast freeze light - Amber
D -Fast freeze switch
Control PanelTemperature control
A. Pilot lightThe temperature within the freezer is controlled by
the thermostat situated in the middle of the
The operation light is illuminated continuously, to
appliance.
show that the appliance is on.
To operate the freezer proceed as follows:
B. Thermostat control knob
Position 1 = minimum coldness
Turn the thermostat control knob clockwise to
Position 6 = maximum coldness
required setting.
Turn the thermostat control knob beyond the ?O?
C. Fast freeze lightposition.
The fast freeze light is illuminated, to show that the
When you first start the freezer, we suggest that you
fast freeze function is working.
turn the thermostat control to a medium setting. For
easier turning of this control, use a small coin.The
D. Fast freeze control switch
internal temperature of the freezer is automatically
When you place fresh food in the appliance, press
adjusted by the thermostat to ensure safe food
the fast freeze control switch.
storage.
However, if the appliance is working in unfavourable
Start your applianceroom conditions such as
- poor ventilation,
Allow the appliance to stand for 2 hours after
installation.- high temperature,
Insert the plug into the wall socket. The pilot light (A)- frequent door openings,
will illuminate to show that the appliance is on.
it may be necessary to select a more suitable
Turn the thermostat control (B) to a midway setting.setting.
Leave the appliance for approximately 4 hours for
the correct temperature to be reached before placing
food inside.
To switch off the appliance turn the thermostat
control to position ?O? .
4 |
ACEC
