Function buttons:in addition to the dishwashing"3 in 1" function:this appliance is equipped with the
programme selected, the following functions can also be setfunction 3 in1, that allows the use of the "3 in 1" combi
with the help of these buttons:detergent tablets.
- water softener setting,This function can be selected with all washing programmes.
- deactivation/activation of the inflow of rinse aid,With the selection of this function the inflow of rinse aid and
salt from each respective supply container is automatically
- deactivation/activation of the ?3 IN 1? function,
deactivated and also the indicator lights for salt and rinse aid
- the cancelling of a programme in progress.
are deactivated.
Once selected this option (indicator light illuminated) it will
remain active also for the following washing programmes.
Programme selection push buttons:the selection of
(Indicator light off - function deactivated).
a washing programme occurs by pressing one of these
Once the programme is running, the "3 in 1" function can NO
buttons.
longer be changed. If you want to exclude the "3 in 1" function
you have to cancel the programme setting (see chapter
The digital display indicates:"Starting a washing programme" - "To cancel a washing
programme in progress") and then deactivate the "3 in 1"
- the level of hardness to which the water softener is set
function.
- if the rinse aid inflow is activated/deactivated
In this case you have to set a washing programme again.
- the approximative remaining time of the running programme
With the use of "3 in 1" combi detergent tablets, the cycle
- the countdown of the delay startdurations given in the "Washing programmes" chart may
- fault codes concerning malfunction of the dishwasherchange.
Deactivation/activation of the 3 in 1 function
"Delay start" option button :this option allows(The dishwasher must be switched off)
the start of the programme to be delayed from 1 to 19 hours.
1. Press the On/Off button. The On/Off indicator light
illuminates (setting mode).
If other indicator lights are on, this means that a wash
Indicator lights:have the following meanings:programme has been selected. The programme must be
cancelled: press simultaneously function buttons 2 and 3
salt refilling indicator light, illuminates when the salt
for about 2 seconds. All the indicator lights will turn off
has run out
(except for the On/Off indicator light and eventually
salt and rinse aid indicator lights) indicating that the setted
rinse aid refilling indicator light, illuminates when
programme has been cancelled and the machine is now in
the rinse aid has run out
setting mode.
The salt and rinse aid indicator lights are never illuminated
2. Press simultaneously function buttons 2 and 3, until
while a washing programme is running even if filling with salt
the indicator lights of function buttons 1, 2, 3 and 4
and rinse aid is necessary.
start flashing.
Programme in progress: illuminates when a
3. Press function button 4, the indicator lights of function
washing programme has been setted and remains
buttons 1, 2 and 3 turn off while the indicator light of the
illuminated for all the duration of the washing
function push button 4 goes on flashing.
programme.
4. Press function button 4 again, the "3 in 1" indicator light
Turns off when the washing programme has ended.
illuminates, indicating that the 3 in 1 funcion is active.
When delay start has been setted, this indicator light
To deactivate the function press function button 4 again, the
turns off and will come on again once the
indicator light turns off.
countdown has elapsed and the washing
programme has started.3 in1 function activeindicator light on
3 in 1-function: indicates the activation/deactivation 3 in 1 function not activeindicator light off
of the 3 in 1-function (see "3 in 1 function").
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds
after which the dishwasher will automatically return to
setting mode.
27 |
ACEC
