The Control Panel
Function buttons
On/Off buttonDigital displayIndicator lights
Programme selection buttons
Delay start button
Function buttons:in addition to the selection of theAudible signals
washing programme and the delay start option, the following
functions can also be set with the help of these buttons: Audible signals have been introduced to help indicate which
operations the dishwasher is performing:
- the setting of the water softener,
- the cancelling of a washing programme in progress,- setting of the water softener
- deactivation/activation of the audible signals.- end of programme
- intervention of an alarm due to malfunction
Programme selection buttons:allows the selection of
Deactivation/activation of the audible signals
the desired washing programme (see "Washing programmes"
(The dishwasher must be switched off before starting this
chart).
procedure)
Factory setting:audible signals activated
�Delay startE button:this option allows the start of the
programme to be delayed from 1 to 19 hours.1.Press the On/Off button. The indicator lights of the
programme selection buttons will illuminate (setting mode).
If only one programme selection button indicator light is
illuminatedthis means that a washing programme is set.
The digital display indicates:
The programme must be cancelled: press simultaneously
- the level of hardness to which the water softener is set,
function buttons 2and 3for about 2 seconds, the indicator
- if the audible signals are activated/deactivated,light of the set programme button starts flashing. After
- the approximate remaining time of the running programme,about 2 seconds the indicator lights of all the programme
selection buttons will illuminate; this means that the set
- the end of the programme (a zero 0 will appear in the digital
washing programme has been cancelled and the machine is
display),
now in setting mode.
- the countdown of the delay start,
2.Press simultaneously function buttons 2 and 3, the indicator
- fault codes concerning malfunction of the dishwasher.
lights of the function buttons 1, 2 and 3 start flashing.
3.Press function button 3, the indicator lights of function
Indicator lights:have the following meanings:
buttons 1 and 2 turn off while the indicator light of the button
3 goes on flashing, the digital display indicates the current
Salt refilling indicator light, illuminates when the saltsetting.
has run out.
Rinse aid refilling indicator light, illuminates when Audible signals deactivated
rinse aid has run out.
Audible signals activated (factory set)
4.To change the current setting, press again function button 3,
the digital display will indicate the new setting.
5.To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.
5 |
ACEC
