132993070.qxd 9/20/02 11:53 AM Pagina 24 (Nero/Process Black pellicola)
If you intend the drain hose to empty into a sink, makeSpecial conditions
sure that the sink is empty and the plug hole is not
If the floor is carpeted or covered with crumbly or soft
blocked. Use the plastic ?U-Piece? supplied.
material, insert a rigid support base under the feet to
prevent noise, vibration or displacement. The base
should protrude a few centimetres beyond the edges of
the machine.
Warning
The machine should NOT be placed on deep pile
carpeting.
Note
Please ensure that when the appliance is installed it is easily
accessible for the engineer in the event of a breakdown.
Important
Before connecting up the machine to new pipework orIn the interest of the
to pipework that has not been used for some time, run
environment
off a reasonable amount of water to flush out any debris
Washing machines and dishwashers should be
that may have collected in the pipes.
connected to the FOUL drainage system, the water will
then be taken to a sewage works for treatment before
Levelling
being discharged safely into a river.
Level the washing machine by raising or lowering theIt is essential that these appliances are not connected to
feet. The feet may be tight to adjust as they incorporatethe surface water drainage system as this water is
a self locking nut, but the machine MUST be level anddischarged directly into a river or stream and may cause
stable.pollution.
If you require any further advice please contact your
local water authority.
Any necessary adjustment can be made with a spanner.
Accurate levelling prevents vibration, noise and-
displacement of the machine during operation. -
-
Some vibration is inevitable, especially if mounted on a
wooden floor.
Sprung wooden floors are particularly susceptible to
--
vibration. For advice, consult a builder. If possible,
-
always place the machine on a solid floor.
!
-! - !--
!"!--
--
- - -
-
-
- -
-
#-#-
24 |
ACEC
