ProblemPossible cause
Y The electronic unbalance detection device has cut
Y Spinning starts late or theENGLISH
in because the laundry is not evenly distributed in
machine does not spin:
the drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several
times before the unbalance disappears and normal
spinning can resume. If, after 5 minutes, the
laundry is still not evenly distributed in the drum,
the machine will not spin. In this case, redistribute
the load manually and reselect the spin
programme.
Water is not
visible in the machine. The machine,The machine makes an unusual
which is the result of modern technology, runsnoise. The machine is fitted with a commutator
in a very economical way with low watermotor which improves machine
consumption. Performance is performance.
nevertheless excellent.
P1035UKP1034UK
If you are unable to identify or solve the problem,
Mod...........Ser.
contact our service centre. Before telephoning, make
a note of the model, serial number and purchase
date of your machine: the Service Centre will require
this information.
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042
21 |
ACEC
