New_12108_14108.qxp 12/12/2005 5:41 PM Page 8
7. DisplayIncorrect option selection
The display shows the following information:
If an option which is not compatible with the set wash
Duration of the programme - Delayed start -programme is selected, the message Err is displayed
Incorrect option selection - Alarm code - End offor 2 seconds.
programme.
Duration of the selected programme
After selecting a programme, the duration is
displayed in hours and minutes ( for example 2.05).
Alarm codes
In the event of operating problems, some alarm
codes can be displayed, for example E20 (see
The duration is calculated automatically on the basis ofparagraph Something not working).
the maximum recommended load for each type of fabric.
After the programme has started, the time remaining
is updated every minute
Delayed start
The selected delay (23 hours max) set by means of
the relevant button appears on the display for 3
seconds, then the duration of the previously selected
programme is displayed.End of programme
The countdown is updated every hour and for the last
2 hours it is updated for each 30 min.When the programme has finished a flashing zero is
displayed.
8 |