1074AppendixAppendix
Specifications
Input
Connectors:XLR (Pin 2 and tip hot)
Type: Electronically balanced/unbalanced, RF filtered
Impedance:Balanced > 50 kOhm, unbalanced >25 kOhm
Max Input Level:> +22 dBu balanced or unbalanced
CMRR:40dB: Typically >55 dB at 1 kHz
Key Input:Electronically balanced/unbalanced, RF filtered Balanced 50 kOhm,
unbalanced >25 kOhm
Output
Connectors:XLR (Pin 2 hot)
Type:Servo-balanced/unbalanced, RF filtered
Impedance:Balanced 60 Ohm, unbalanced 30 Ohm
Max Output Level:> +22 dBm balanced, > +20 dBm unbalanced
System Performance
Bandwidth:20 Hz to 20 kHz, +0/-0.5 dB
Frequency Response:0.35 Hz to 200 kHz, +0/-3 dB
Noise:< -96 dBu, unweighted, 22 kHz measurement bandwidth
Dynamic Range:> 115 dB, unweighted
THD+Noise:0.008% typical at +4 dBu, 1 kHz unity gain
0.08% typical at +20 dBu, 1 kHz, unity gain
< 0.1% any amount of compression up to 40 dB, 1 kHz
Interchannel Crosstalk: < -80 dB 20 Hz to 20 kHz
Stereo Coupling:True RMS Power Summing
Power Supply
Operating Voltage:100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz
Power Consumption:30 Watts
Fuse:100-120 VAC:300 mA Slow Blow
200-240 VAC: 160 mA Type T
Mains Connection:IEC receptacle
Physical
Dimensions:1.75"Hx19"Wx9"D (4.4cmx48.3cmx20.1cm)
Weight:6.9 lbs.
Shipping Weight:9.3 lbs.
Note: Specifications subject to change.
¨¨
1074 User Manual7 |