CARE AND MAINTENANCE
APPLIANCE EXTERIOR AND CONTROL 5. Unscrew the hose(s) from the machine.
PANEL6. Remove the filter from the washing machine
Clean using normal household detergent (do with pliers and clean it.
not use abrasive products).7. Replace the filter and screw the hose
Dry with a soft cloth.connection back on to the machine.
8. Turn on the tap(s) and ensure that the
DETERGENT DRAWERconnections are completely water-tight.
Disengage the
drawer by pressing For machines with ?Water Stop? hose:
down the release 1. Turn off the tap.
lever and extract it.
Remove the inserts 2. Unscrew the ?Water Stop?
hose from the tap.
(the siphon from the
softener 3. Remove only the loose filter
compartment, the and clean it.
siphon from the 4. Refit the filter and screw the
chlorine bleach ?Water Stop? hose to the tap.
compartment and the 5. Turn on the tap and ensure
coloured insert for that the connection is
liquid detergent).completely water-tight.
Wash all the parts under running water.
Reposition the inserts, make sure to push the
siphons in until they lock and refit the drawer.
DOOR SEALFILTER
Clean with a damp cloth when necessary. Check and clean the filter at least 2 or 3 times
a year (see ?Removing the Filter?).
Check the seal folds for foreign parts
periodically.
WATER HOSE MESH FILTER
Check and clean periodically
For machines with a straight
water supply hose:
1. Turn off the tap(s).
2. Unscrew the hose(s) from the
tap(s).
3. Remove the mesh filter and
clean it.
4. Refit the filter and screw the hose
connection to the tap.
CHILD SAFETY DEVICE
To prevent improper use of the machine, turn the
plastic screw on the inside of the appliance door
with the thick, rounded edge of the coloured
insert or with a coin.
1. Vertical slot - Safety position: door cannot
lock into place.
2. Horizontal slot - Normal position: door can be
closed as before.
82 |
ACEC
