Cleaning and care
1Warning: For cleaning, the appliance must be switched off and cooled
down.
Warning: For safety reasons, do not clean the appliance with steam jet or
high-pressure cleaning equipment.
Important: Do not use any abrasive cleaners, sharp scrapers or abra-
sive items.
Outside of the appliance
Wipe the front of the appliance with a soft cloth and a solution of washing-
up liquid and warm water.
With metal fronts use the cleaners that are commercially available.
Oven Interior
Oven lighting
You can switch on the oven light to make cleaning easier.
Cleaning
The walls that have a catalytic coating are self-cleaning. They absorb
splashes of fat while the oven is in use.
To support this self-cleaning process, we recommend heating the oven
without any food at regular intervals.
1.Remove all slide-in items from the oven.
2.Wash the oven floor with warm water and washing up liquid, then dry it.
3.Set the oven temperature to 250 °C.
4.Switch the oven off after one hour.
5.When the oven has cooled but is not cold, wipe off any remaining soiling
with a soft damp sponge.
1Important! Do not use oven sprays or abrasive cleaners. Do not use soap
or other cleaning agents. Doing so can damage the catalytic surface.
3Over time the catalytic coating can discolour slightly. This does not affect its
catalytic properties.
Accessories
Wash all slide-in units (shelf unit, baking tray, shelf support rails etc.) after
each use and dry well. Soak briefly to make them easier to clean.
32 |
ACEC
ELECTROLUX
