Choice of electrical connections
There are two possible ways to connect your cooker,
please choose from the most appropriate after reading
the descriptions :
?It is recommended that this appliance is wired with
suitably rated cable (min 13 A), into fixed wiring
using a double pole isolator with at least 3 mm
contact separation in all poles and neutral, located
within 2 m of the appliance. If this fixed wiring
circuit is only supplying the cooker, then a fuse of
13 A (or circuit breaker) should be incorporated.
When the circuit combines oven and hob, then
wire and fuse rating should be increased
accordingly.
Subject to Regional Electricity Company
regulations if you wish to connect the oven
and hob to the power supply you may use
one of the following methods :
?If you wish to connect an oven and a hob to a
cooker point you can :
-- by connecting the oven and hob separately to
the cooker point. Oven and hob units should
be separately connected to a control panel. In
this case the cooker should be operated from
2
6mmtwin core, and earth, PVC insulated
multicore cable. See Fig. 1.
Control Panel
OvenHob
Fig. 1
33 |
ACEC
ELECTROLUX
