Door reversibility
The side at which the door opens can be changed from the
USE
right side (factory adjustment) to the left side, if the
installation site requires.
Cleaning the interiorFresh food refrigeration
Warning! When changing the side at which the door
XciohthjMrÃiMthriptap16Before using the appliance for the first time, washTo obtain the best performance:opens, the appliance may not be connected to the mains.
the interior and all internal accessories with luke-XciohthjMrÃiMthriptap16Before using the appliance for the first time, washRemove plug from the mains beforehand.
XciohthjMrÃiMthriptap16Before using the appliance for the first time, wash
the refrigerator;Procced as follows:
the typical smell of a brand-new product, then dry
" do cover or wrap the food, particularly if it has aXciohthjMrÃiMthriptap16Before using the appliance for the first time, wash
thoroughly.be made with another person that will keep a firm hold on
strong flavour.
Do not use detergents or abrasivethe doors of the appliance during the operations.
" Position food so that air can circulate freely round
powders, as these will damage the finish.Before carrying out any operations, remove the plug
it.XciohthjMrÃiMthriptap16Before using the appliance for the first time, wash
1. Remove the upper hinge taking care for the upper
Operation
door not to fall off and keep it for future actions;
XciohthjMrÃiMthriptap16Before using the appliance for the first time, washRemove the upper support and mount it in the
opposite side
Open the refrigerator door and turn the thermostat2. remove the upper door;
knob, clockwise, beyond the ?O? (STOP) position.3. unscrew the middle hinge. Unscrew the plastic plugs
The appliance will start to operate.located on the opposite side of the central hinge
To stop operation, simply turn the thermostat knob toand introduce them in the holes occupied before by
position ?O?the hinge;
XciohthjMrÃiMthriptap16Before using the appliance for the first time, wash
XciohthjMrÃiMthriptap16Before using the appliance for the first time, wash
Temperature regulationscrews;
The temperature is automatically regulated and can6. remove the bottom hinge by unscrewing its fixing
be increased to achieve a higher temperaturescrews;
XciohthjMrÃiMthriptap16Before using the appliance for the first time, wash7. using a 12 mm spanner, unscrew the hinge pin and
XciohthjMrÃiMthriptap16Before using the appliance for the first time, washreassemble it on the opposite side of the hinge;
XciohthjMrÃiMthriptap16Before using the appliance for the first time, wash8. adjust the level of the appliance by screwing out the
adjustable foot, or feet, at the bottom of the cabinet
XciohthjMrÃiMthriptap16Before using the appliance for the first time, wash
keeping in mind that the temperature inside theusing your fingers or a tool;
refrigerator depends on:XciohthjMrÃiMthriptap16Before using the appliance for the first time, wash
using the screws previously removed. Slide the hole
" room temperature;
cover out of the ventilation grille by pushing it in the
XciohthjMrÃiMthriptap16Before using the appliance for the first time, washdirection of the arrow and reassemble it on the
opposite side;
" the quantity of food stored;
10. refit the ventilation grille, fixing the screws;
" location of appliance.
XciohthjMrÃiMthriptap16Before using the appliance for the first time, wash
A medium setting is generally the most suitable.
12.reassemble the middle hinge on the opposite side;
13.replace the upper door.
Important14.In your documentation bag you will find the upper
If the ambient temperature is high or thehinge necessary to make the reversibility. Please
mount it in their relevant place.
appliance is fully loaded, and the appliance is
set to the lowest temperatures, it may run15.Dismount the handle cover making pressure and using
continuously causing frost to form on the reara screwdriver. Dismantle the handles and reassemble
wall. In this case the dial must be set to a higherthem on the opposite side. Cover the holes with the
temperature to allow automatic defrosting andXciohthjMrÃiMthriptap16Before using the appliance for the first time, wash
therefore reduced energy consumption.presently.Place the handle cover.
Warning:
After having reversed the opening direction of the
doors check that all the screws are properly
tightened and that the magnetic seal adheres to the
cabinet. If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to the cabinet.
XciohthjMrÃiMthriptap16Before using the appliance for the first time, wash
accelerate this process by heating up the part involved
16
with a normal hairdrier.25 |
ACEC
ELECTROLUX
