Place guide (Ha) on the inside part of the furniture
door, up and down as shown in the figure and mark
CONTENTS
the position of external holes. After having drilled
holes, fix the guide with the screws supplied.
Instructions for the UserInstructions for the
Installer
Important Safety Information2
Operation 4Technical Specification13
Before use 4Installation14
Fix cover (Hc) on guide (Ha) until it clips into placeControl panel - Use of the freezer4
Positioning14
Start your appliance4
Shelf holders14
Temperature control4
Electrical Connection15
Quick-freezing5
Door Reversal16
Freezing fresh food5
Frozen food storage5
Thawing5
Making ice cubes5
Use of the refrigerator-Setting the temperature 6
Open the appliance door and the furniture door at
Fresh food refrigeration 6
90°. Insert the small square (Hb) into guide (Ha).
Normal operating sounds6
Put together the appliance door and the furniture
door and mark the holes as indicated in the figure. .Movable shelves7
Positioning the door shelves7
Hints and Tips8
Maintenance and Cleaning9
Internal cleaning9
When the appliance is not in use 9
Remove the brackets and mark a distance of 8 mm
from the outer edge of the door where the nail mustChanging the light bulb 9
be fitted (K).
External cleaning9
Defrosting9
Something Not Working10
Service and Spare Parts11
Customer Care 11
Guarantee Conditions 12
Place the small square on the guide again and fix it
with the screws supplied.
Should the lining up of the furniture door be
necessary, use the clearance of slots.
At the end of operations, it is necessary to check if
the door of the furniture closes properly.
183 |
ACEC
ELECTROLUX
