Using your appliance
For best results we
Loading your appliance
recommend you to use the
Before placing dishes in the machine, remove any scraps ofcutlery grid provided (if the
food, to avoid clogging the filters and consequently reducingsize and dimensions of the
the performance. cutlery allow it).
Do not load very small items which can fall through the
baskets.
Open the door and slide out the baskets to load the dishes.
The lower basketUI76
The lower basket is designed to take saucepans, lids, plates,
salad bowls, cutlery etc.
Serving dishes and large lids should be arranged around theThe upper basket
edge of the basket, ensuring that the upper spray arm can turn
The upper basket is designed for plates (dessert plates,
freely.
saucers, dinner plates of up to 24 cm in diameter), salad
bowls, cups and glasses.
Arrange items on and underneath the cup racks so that water
can reach all surfaces.
The cup rack on the left folds
up to increase your loading
flexibility.
Glasses with long stems can
be placed upside down in the
cup racks.
UI61UI24
Light items (plastic bowls
The rows of prongs on the lower basket can be easily lowered
etc.) must be loaded in the
to allow you to load pots, pans and bowls.
upper basket and arranged
To lower the prongs: so they do not move. US69
- Slightly pull them upward and let them drop down (see
picture).
Before closing the door, ensure that the spray arms can
- To bring them back to the standing position, just pull them up rotate freely.
again.
Adjusting the height of the upper basket
If washing very large plates (over 27 cm and up to 31 cm in
diameter) you can load them in the lower basket after moving
the upper basket to the higher position.
To move to the higher position proceed as
follows:
UI84
UI83
1.Move the front runner
stops (A) of the upper
The cutlery basketbasket outwards and slide
the basket out.
Long bladed knives stored in an upright position are a
potential hazard.2.Refit the basket in the
Long and/or sharp items of cutlery such as carving kniveshigher position and
must be positioned horizontally in the upper basket.replace the stops (A) in
Take care when loading or unloading sharp items such astheir original position.
knives.RC01
Cutlery should be placed in the removable cutlery basket with
When the top basket is in the higher position it will only take
the handles facing downwards. If the handles protrude from
plates up to 20 cm in diameter and you will not be able to use
the bottom of the basket,
the cup racks.
obstructing the lower spray
arm, load the cutlery with the
handles facing upwards.After loading your machine always close the door, as an
open door can be a hazard.
Mix spoons with other cutlery
to prevent them from sticking
together.
UI10
7 |
ACEC
ELECTROLUX
