Flue assembly
Upper exhaust flueUpper exhaust flueUpper exhaust flueUpper exhaust flueUpper exhaust flue
Slightly widen the two sides of the upper flue
and hook them behind the brackets 7.2.17.2.17.2.17.2.17.2.1,
making sure that they are well seated.
Secure the sides to the brackets using the 4
screws 12c12c12c12c12c (2,9 x 9,5) supplied.
Make sure that the outlet of the extensions pieces
is aligned with the chimney outlets.
Lower exhaust flueLower exhaust flueLower exhaust flueLower exhaust flueLower exhaust flue
Slightly widen the two sides of the flue and hook
them between the upper flue and the wall,
making sure that they are well seated.
Fix the lower part laterally to the hood body
using the 2 screws 12c12c12c12c12c (2,9 x 9,5) supplied.
USE
Control panel
LLLLLLightSwitches the lighting system on and off.
SSSSSLedMotor running led.
V1V1V1V1V1 MotorSwitches the extractor motor on and off at low speed. Used to provide a contin-
uos and silent air change in the presence of light cooking vapours.
V2V2V2V2V2 SpeedMedium speed, suitable for most operating conditions given the optimum treated
air flox/noise level ratio.
V3V3V3V3V3 IntensiveMaximum speed, used for eliminating the highest cooking vapour emission,
including long periods.
GB9 |
ACEC
