Technical Specifications
ModelEFI 640EFI 635
Dimensions (in cm):
Height (cm)4040
Width (cm)59,859,8
Depth (cm)2727
Maximum absorbed power:360 W200 W
Motor absorption:2 x 140 W1 x 120 W
Lighting:2 x 40 W (E14)2 x 40 W (E14)
Length of the cable: 150 cm150 cm
Electrical connection:230 V230 - 240 V
Subject to change without notice.
Installation
Unpacking
Check that the cooker hood has no damages.
Transportation damages should immediately be
reported to the company responsible for the
transportation.
Damages, faults and eventually missing details
should immediately be reported to the retailer.
Min
Take care of the packing materials so that small65 cmMin
60 cm
children cannot play with them.
Fitting
The hood is to be mounted on the wall.
When installed, the hood must be not less than 60Fig. 8
cm. above electric burners or 65 cm. above gas or
mixed-fuel burners (Fig. 8).
The hood can be installed above these heights but
for optimum performance it should be installed at
the distance quoted for the appropriate heat source.
Electrical connection for UK only
Safety warnings for the electrician
Connect the hood to the mains supply via a double
pole switch which has 3 mm minimum separation
between the contacts.
The switch must be accessible at all times.
The following is valid in the United Kingdom
only:
- the wire which is coloured blue must be
connected to the terminal which is marked with
the letter N or coloured black, -
- the wire which is coloured brown must be
connected to the terminal which is marked with
the letter L or coloured red.
12 |
ACEC
