The upper basket Use of detergent
The upper basket is designed for plates (dessert plates,Only use detergents specifically designed for use in
saucers, dinner plates of up to 24 cm in diameter), saladdishwashers.
bowls, cups and glasses.
We recommend the use of Finish detergents.
Arrange items on and
underneath the cup racks soUsing no more then the correct amount of detergent
that water can reach allcontributes to reducing pollution.
surfaces. Prior to the start of a wash programme (not for the "Rinse
Glasses with long stems canand Hold" programme). The detergent is released during
be placed upside down in thethe washing phase.
cup racks.Please observe the manufacturerOs dosing and storage
Light items (plastic bowlsrecommendations as stated on the detergent packaging.
etc.) must be loaded in the
upper basket and arranged
so they do not move. US64
Fill with detergent
1.If the lid is closed: press release button (1). The lid springs
open.
2.Fill the detergent dispenser (2) with detergent.
In case that plates are loaded in the upperThe marking indicates the dosing levels:
basket:20 = approximately 20 g of detergent
load them starting from the30 = approximately 30 g of detergent
rear positions of the
basket; tilting them slightly
forwards and avoiding the
front positions near the
door.
US71
Before closing the door, ensure that the spray arms can
rotate freely.
DE19DE22
3.All programmes with prewash need an additional detergent
Adjusting the height of the upper basket dose (5/10 g) that must be placed in the prewash detergent
chamber (3). This detergent will take effect during the
If washing very large plates you can load them in the lowerprewash phase.
basket after moving the upper basket to the higher position.
4.Close the lid and press until it locks in place.
Maximum height of the dishes in
upper basketlower basket
With upper basket raised20 cm31 cm
With upper basket lowered24 cm27 cm
To move to the higher position proceed as
follows:
1.Move the front runner stops (A) of the upper basket
outwards and slide the basket out.
2.Refit the basket in the higher position and replace the stops
(A) in their original position.
When the basket is in the
higher position you will not
be able to use the cup
rack(s).
RC01
After loading your machine always close the door, as an
open door can be a hazard.
8 |
ACEC
