Controls and programme table
All figures are nominal and vary for example due to temperature variations on the inlet water.
The figures apply to washing up 5 settings.
14235
1 65! Intensive5 Cycle sequence lamp
For loads which have heavily dried-on food While the programme is in progress, the operating
remnants and for those which are heavily soiled.lamp is lit and it goes out when the programme
is ready.
2 55! Normal
For normal soiled loads.
3 45! QuickDoor lock
For lightly soiled loads, such as cups, saucers Press the handle down and open the door. Avoid opening
and glasses.the door while the machine is running. If the door is opened
and is put standing ajar after a completed programme, the
Note! If more than one Temperature button is dishes will dry faster.
pressed in, the machine selects the lowest
temperature.
4 Selector knob
To start the machine:
- Turn the selector knob clockwise to the programme
start. The ON/OFF switch is built into the programme
selector. During the water heating process, the timer
is standing still. To isolate the dishwasher from the
mains completely, unplug it from the wall socket.
- 5 - |
ACEC
ELECTROLUX
